Nissan Maxima Oil Reset Guide
The Nissan Maxima is a full-size car (previously mid-size) manufactured by Nissan and sold primarily in North America, the Middle East, and China. Making its sales debut in 1981 for the 1982 model year as the Datsun Maxima, it replaced the earlier Datsun 810. The name "Maxima" dates back to 1980 for the 1981 model year when the upscale 810 sold as the "810 Maxima" in North America. Like the 810, early versions of the Maxima had their origins in the Datsun/Nissan Bluebird. The Datsun brand was phased out in favor of Nissan in 1983 for the 1984 model year, thus becoming the Nissan Maxima.
Most pre-2003 Maximas were built in Oppama, Japan, until the current North American Maximas started being assembled in Smyrna, Tennessee.
In some markets beyond North America, the "Maxima" name has also been applied to the Nissan Cefiro and Teana. Wikipedia
Oil Reset Guide
2005-2008
1. Turn the ignition on.
2. When you turn the ignition key is on, the system start-up warning is displayed on the screen. Read the the warning and select the OK key by pressing the ENTER button.
3. When the TRIP button is pressed, the following modes will display on the screen: Warning message (if any) TRIP1 > TRIP 2 > FUEL ECONOMY > MAINTENANCE > AUDIO OR OFF > TRIP 1
4. Select MAINTENANCE and then select the Engine Oil key using the joystick and press the ENTER button to display the screen to change the maintenance interval/RESET.
5. To return to the previous display after the MAINTENANCE NOTICE screen is displayed, press the BACK button.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.
2009-2014
1. Turn the ignition to run (push START/STOP button once).
2. Press the square button, located on the instrument panel just behind the steering wheel to the left, to display the SETTINGS mode.
3. In the SETTINGS mode screen press the circle button to move to MAINTENANCE.
4. Select ENGINE OIL and follow the prompts. Repeat for ENGINE OIL FILTER.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
2015-2016
1. Start the engine.
2. Use the LEFT or RIGHT arrows on the steering wheel to highlight the SETTINGS menu and press ENTER.
3. Select MAINTENANCE and press ENTER.
4. From the MAINTENANCE menu select OIL and follow the prompts and do the same for the FILTER.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.