Maintenance Required Lamp/Indicator: Service and Repair
Engine Oil Reset Procedure
Note:
1.Turn the POWER switch to OFF mode with the trip meter "A" shown.
2.Turn the POWER switch to ON mode with the MPH or km/h button held down.
3.Keep pressing the button until the odometer indicates "000000" and the multi-information display indicates that the reset is complete.
Navigation Maintenance Item Setting (If equipped)
When the navigation system is turned on, the "Information" screen displays when it is time to replace a part or certain components.
1.Push the "SETUP" button.
2.Touch "Vehicle"
3.Touch "Maintenance".
4.Touch the desired button.
"Delete All": To cancel all conditions which have been input.
"Reset All" : To reset the item which has satisfied a condition.
"Reminder" : When this button is touched, the indicator is illuminated. The system is set to give maintenance information with the "Information" screen. When the vehicle needs to be serviced, the touch screen button color will change to orange.
If "ON" is selected, the system gives maintenance information with the "Information" screen when the system is turned on.
If "OFF" is selected, the "Information" screen is disabled.
When the vehicle needs to be serviced, the touch screen button color will change to orange.
4.Input the conditions.
Notice of "Date": The next maintenance date can be input.
Notice of "Distance": The driving distance until the next maintenance check can be input.
"Delete": To cancel the date and distance conditions.
"Reset": To reset the date and distance conditions.
5.Touch "OK" The screen returns to the "Maintenance" screen.
-For scheduled maintenance information, please refer to the Scheduled maintenance guide or Owners manual supplement.
-Depending on your driving or the road conditions, the system may have a time-lag between the data which has been input and the actual date and driving distance.
THANK OYOU!