Chrysler Dakota Manual Oil Reset Guide
2005-2007
I.Turn off the ignition.
2.Press and hold the TRIP ODOMETER button in
the instrument cluster and turn the ignition to
Accessory.
3.Keep the button pressed for 5 seconds until
OIL SERVICE RESET (RE) or INSPECTION RESET
(RE) appears in the display.Then release the
button.
4.Press and hold the button again for 5 seconds
until RE or RESET flashes in the display.Then
release the button.
5.With the display flashing, press the button
briefly to reset and display the new Service
Interval.
6.After this, END SIA appears in the display for
approximately 2 seconds.
7.Turn the ignition off and start the engine to
verify the indicator has been reset.
2008-2010
1.Turn the ignition to run (one position before
starting engine).
2.Fully depress the accelerator pedal slowly
three times within 10 seconds.
3.Turn the ignition off and then start the engine
to verify the indicator has been reset.