Chrysler Crossfire Manual Oil Reset Guide
2004
1)Turn on the ignition switch to the run position.
2)Press the RESET button fortrip odometertwice
within 1 second. Display for FSS service request
is activated in 10 seconds.
3)Move the ignition switch to the off position
while the display is active.
4)Press RESET button for the trip odometer and
hold it as you turn on the run position.
5)Press and hold the TRIP ODOMETER
button(about 10 seconds) until a sound is heard
and the new start distance appears in display.
2005
1)Press and hold the knob/button.While turning
the key to ON/RUN again.The present status for
days or distance is displayed once more.
2)Continue to hold the knob/button.A1’ter
approximately 10 seconds,a single sounds and
the display shows 7,000 miles(Canada:11,000km)
for approximately 10 seconds.
2006-2008
1.Turn the ignition to run (one position before
starting engine).
2.Within one second press the knobfbutton
twice.
3.The present status for days or distance is
displayed. Within 10 seconds turn the key to
OFF/LOCK.
4.Press and hold the knob/button, while turning
the distance is displayed once more. Continue to
hold the knob/button. After 10 seconds, a signal
sounds and the display shows 7,000 mi or
11000km for 10 seconds.
5.Re|ease the knob/button.
6.Turn the ignition off and then start the engine
to verify the indicator has been reset.